The combination of Phililux Major Light and Phililux Standard Light as Satellite gives very high illumination at the operating surface. Very small parts and deep cavities of the body can be illuminated without any glare.

FEATURES
. Ceiling suspended light with colour correcting filters.
. Spring balance control.
. Sterilizable-cum-focussing handle for Major & Standard domes.
. Power supply source with constant voltage transformer (CVT)
. Special option available for low ceiling height.
. Special blue gasket to prevent collection of dust.
. Parabolic reflectors.
. MCB at CVT output for short circuit protection.

New age halogen operation theatre lights are designed to aid any surgery. It offers maximum comfort with a soothing brilliant blue-white light. Developed in close association with leading surgeons and supported by the excellent international dealers and distributors.
Use of five optical balanced light sources give very high illumination at the operating surface to illuminate very small parts and deep cavities of the body without any glare.

FEATURES
· Aerodynamically designed dome for ceiling suspended light.
· Highly suitable for modern laminar flow OT’s.
· Spring balance control.
· Sterilizable focusing handle & maneuvering handle.
· Power supply source with constant voltage transformer (CVT).
· Longer reach of arm suitable for positioning the dome at any place on OT table.
· Parabolic aluminum anodized reflectors.
· MCB in CVT output for short circuit protection.
· Higher depth of illumination.

Technical Data
Overall sizes approximately given below.
Length of Table Top : 200cm
Width of Table Top : 53cm
Minimun Height : 75cm
Maximum Height : 100cm
Lateral tilt : 200 + 20
Trendelenburg : 200 + 20
Back Section : up/down : 900 / -150
Leg Section : up/down : 200 / -900

FEATURES
· Single cylinder eccentric design for maximum imaging area
· Rapid C-Arm maneuverability
· Maintenance friendly, leak proof, non-hydraulic fully electrical design.
· Remote controlled, automatic, smooth and precise table movements
· Extensive use of stainless steel for rust free long life
· Equipped with wide range of attachments for various patient positions.

SPECIFICATIONS
Overall sizes approximately given below.
Table Top : 1955mm x 483mm
Height Adjustment : 810mm x 1065mm
Trendelenberg : 30 degree
Rev. Trendelenberg : 30 degree
Lateral tilt : 18 degree both sides (manual)
Side Rails : Stainless Steel

FEATURES
. Rigid top tray for monitors with SS railing and stainless steel Table Top.
. Two built in self sealing Schrader type Oxygen outlets (4.22kg/ cm square)
. Circle Absorber (optional) can be mounted on the left side of the SS Pull-Push Front handle.
. Extended rear platform for two 10litres water capacity cylinders.

Overall sizes and other sizes approximately given below.
OPTIONS
. Selectatec back bar for fitting Temparatures & Flow Compensated vaporiser
. Gas pipeline connection at the back, in place on Two 10 litres water capacity cylinders.

STUCTURE
Tubular rigid electrostatically powder coated rust free extruded Aluminium structure.

WHEELS
Four large diameter antistatic castor wheels with ball bearing. Front castors have individual brakes.

ROTAMETERS
Long (230mm)all side visible, rotating bobbin flow meters calibrated in double/triple scale for accuracy and clarity in reading.
Oxygen: 100mL/min to 10 litres/min
Nitrous oxide: 200mL/min to 12 litres/min

FEATURES
. Rigid top tray monitors, and stainless steel Table Top
. Two builtin self sealing Schrader type Oxygen outlets (4.22kgs/cm sqaure)
. Circle Absorber (optional) can be mounted on the left side of the main frame.
. Extended rear platform for two 10 litre water capacity cylinders.

STRUCTURE
Tabular rigid electrostatistically powder coated steel sections.

WHEELS
Four large diameter antistatic castor wheels with ball bearings. Front castors have individual brakes.

ROTAMETERS
Long (230mm) rotating bobbin flowmeters calibrated in double/triple scale for accuracy and clarity in reading.

Oxygen: 100mL/min to 10 litres/min.
Nitrous Oxide: 200mL/min to 12litres/min


DIMENSIONS
Overall sizes approximately given below.
Height: 154cm
Depth : 52cm
Width : 60cm

WEIGHT (UNPACKED)
Overall sizes approximately given below.
65kgs

FEATURES

Advanced Micro controller based Technology
ELSY-360 series Electro-surgical generators are equipped with latest micro controller based sensing technology to give consistent performance over wide range of surgical procedures. It's unique circuitry monitors all the functions constantly to produce excellent performance.

Smart Auto Stop Coagulation and Endicott Mode
Micro controller measures the tissue impedance and automatically stops the H.F delivery after obtaining "optimum coagulation" without charring the tissue. Sticking effect & heat produced on instrument is reduced which increases life of the instrument. Thermal spread is also minimized in this mode because the machine senses increase in tissue impedance and stops the delivery at appropriate time.

Programming Mode for 9 different surgeries
In this mode surgeon can store programs for 9 different surgeries. Program can be recalled by selecting the program number. On each program all the parameters can be stored as per requirement.

8 modes in Monopole & 4 Special modes for bipolar

· Split type Patient plate contact quality monitoring system for maximum patient safety PPCM with Split Type (Dual Pad) Patient Plate
With this contact quality monitoring takes place. The moment the contact area with the patient reduces it stops the HF delivery, gives an Error message on front panel and PPCM LED will glow with an audible alarm.

PPCM with Conventional Patient Plate
With this sinle pad plate wire disconnection is monitored and on disconnection of anyone wire, the Unit will stop the HF delivery, gives an Error message on front panel and PPCM LED will glow with an audible alarm. Alan strongly recommends use of Split type Neutral Electrode (Patient Plate) for maximum safety.

No need of stabilizer due to advance circuit design

This unit is totally made from SS 304 sheet. Self-generated steam chamber is fitted, if necessary, operated electrically on 400/440v A.C. mains. Door is of high cast gun metal and ring is of S.S. Sterilizing chamber is of double walled Radial locking system of door, pr.gauges, safety valve, are with this unit. As special fitting inter cycle steam control valve is provided. The whole unit is mounted on painted sturdy M.S. tubular stand.

Cabinet made of mild steel sheet epoxy powder coated
with stainless steel top.
. High-powered vacuum pump oil immersed assembled to 1/2 HP heavy-duty motor.
. Two graduated glass bottles of 1.5 Itr. each.
. Synthetic Air-tight rubber lids.
. Non-collapsible tubing.
. Overflow cut-off device.
. Complete with vacuum gauge, fuse & fuse blowen device,
vacuum control knob.
. Vacuum -700t10mm Hg.
. Mounted on four heavy duty castors.